How to Design an Xbox 360 Controller Custom Paint Job – By MyCustomXbox
January 21st, 2010 by VC Review
This step by step tutorial will guide you through the process of how to design a paint scheme for your Xbox 360 controller. By the end of this tutorial you should know how to design multiple different masks and how you should apply those masks during painting. Brought to you by www.MyCustomXbox.com Share your controllers with MyCustomXbox on Facebook at http and Follow MyCustomXbox on Twitter at twitter.com . And Remember, Everyone Should Know How To Paint an Xbox 360 Controller!…
This entry was posted on Thursday, January 21st, 2010 at 10:08 pm and is filed under Xbox. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.
January 21st, 2010 at 10:08 pm
dont waste money on this shit
January 21st, 2010 at 10:08 pm
A few light layers of adhesion promoter, then a layer or 2 of whatever color Krylon Fusion paint
January 21st, 2010 at 10:08 pm
what paint do i use? primer?
January 21st, 2010 at 10:08 pm
You have to use a t8 torx screwdriver, you can buy one of amazon for £2.50, or radioshack, shops like that.
January 21st, 2010 at 10:08 pm
i have a wood desk and it works “ok”
January 21st, 2010 at 10:08 pm
to get all the paint supply to paint the controller
January 21st, 2010 at 10:08 pm
i cant get the screws out of the controller
January 21st, 2010 at 10:08 pm
there basicly the same thing blue tape is just better known because when you would paint say a room you would use scotch blue tape to do the same thing he is. but in all actuality it wouldn;t make that much of a difference if any.
January 21st, 2010 at 10:08 pm
….why?
January 21st, 2010 at 10:08 pm
damn gotta go to an art store now!
January 21st, 2010 at 10:08 pm
your awesome, thanks man.
January 21st, 2010 at 10:08 pm
You can also use green painter’s tape. It works just as well.
January 21st, 2010 at 10:08 pm
if u don’t have a excactor-knife then just use a stanley knife… and if you don’t have 1 a those then i think that you can afford one, if you can afford all the other things needed
January 21st, 2010 at 10:08 pm
Anything from 3M.
January 21st, 2010 at 10:08 pm
there the same
January 21st, 2010 at 10:08 pm
there the same
January 21st, 2010 at 10:08 pm
the blue (aka painter’s tape). Made to leave no residue.
January 21st, 2010 at 10:08 pm
wots better masking or that blue tape
January 21st, 2010 at 10:08 pm
You can use a razor blade man. The only reason he is using a knife like that is because it’s easier to hold and make cuts with.
January 21st, 2010 at 10:08 pm
Could i use a razor blade or do i need a knife like that?
January 21st, 2010 at 10:08 pm
gunna try the monster one
January 21st, 2010 at 10:08 pm
next make a transformer controller
January 21st, 2010 at 10:08 pm
sick
January 21st, 2010 at 10:08 pm
do we have to use a primer in the beggining or should i go ahead and spray it?
January 21st, 2010 at 10:08 pm
3m scotch painters tape